@article { author = {Abbasi Chaleshtori, Laleh and Nejadkoorki, Farhad and Ashrafi, Khosro}, title = {Performance of AERMOD Under Different Building Forms and Dimensions}, journal = {Environmental Sciences}, volume = {13}, number = {1}, pages = {15-24}, year = {2015}, publisher = {Shahid Beheshti University}, issn = {1735-1324}, eissn = {2588-6177}, doi = {}, abstract = {AERMOD is an advanced model of the dispersion of air pollutants that supports a variety of source types and is appropriate for estimating impacts from short-range transport for distances less than 50 km. The US Environmental Protection Agency (EPA), in conjunction with the American Meteorological Society (AMS), has developed a new air quality dispersion model known as the AMS/EPA Regulatory Model (AERMOD). There is significant evidence on the impacts of buildings on dispersions of pollutants and, among the current air pollution models, AERMOD is that one that takes into account building characteristics. Due to its capabilities, the model has also been suggested by the USEPA. The current research examines the impacts of building characteristics as well as change in the dimensions of industrial structures close to a point source on the model output. Three different shapes (namely cubic, long and wide) were assumed as the building forms. Results showed that while the building dimensions increased the downwind pollution concentration was also increased significantly. Furthermore, buildings with a wide shape had greater impacts on pollution than the other two building forms. In other words, the output model shows greater sensitivity than the width of the building.}, keywords = {(AERMOD model,Building dimensions,Building form,Building Profile Input Programme (BPIP}, title_fa = {بررسی تاثیر تغییر ابعاد و شکل سازه‌های صنعتی بر خروجی مدل AERMOD}, abstract_fa = {AERMOD مدل پیشرفته­ای است که برای مدل‎سازی پخش آلاینده­های هوا از منابع مختلف و برای فواصل کمتر از 50 کیلومتر از منابع انتشار مورد استفاده قرار می­گیرد. این نرم­افزار نخستین بار توسط انجمن هواشناسی آمریکا با همکاری آژانس حفاظت محیط‎زیست آمریکا تهیه شد. با توجه به این­که وجود موانعی مانند ساختمان­ها بر سر راه منابع آلاینده می­تواند در نحوه پراکنش و میزان غلظت آلاینده­های خروجی تاثیر مهمی داشته باشد و از طرفی با نظر به این­که مدلAERMOD  یکی از مدل­هایی است که عامل ساختمان را در محاسبات خروجی می­تواند لحاظ کند، در این بررسی میزان تاثیر تغییر ابعاد و شکل سازه­های صنعتی نزدیک یک منبع آلاینده نقطه­ای به عنوان ورودی به مدل AERMOD بر خروجی این مدل بررسی می­گردد. در این مطالعه در زمینه بررسی تاثیر ابعاد و شکل ساختمان سه شکل مکعبی، گسترده و طویل در نظر گرفته شد و در نسبت‎های متفاوت ارتفاع دودکش به ارتفاع ساختمان این روند مورد بررسی قرار گرفت. نتایج حاصل از این مطالعه بیانگر آن است که در زمینه بررسی شکل و ابعاد ساختمان صرف‎نظر از شکل ساختمان، با افزایش ابعاد ساختمان در هر یک از اشکال به طور جداگانه (طول، عرض و ارتفاع) غلظت آلاینده به میزان قابل ملاحظه­ای در پایین دست ساختمان افزایش می یابد. در زمینه اشکال ساختمانی نیز به نظر می­رسد که شکل ساختمانی گسترده یا عریض تاثیر افزایشی بیشتری بر غلظت آلاینده نسبت به دو شکل ساختمانی مکعبی و طویل دارد و به عبارت دیگر خروجی مدل نسبت به عرض ساختمان حساسیت بیشتری را نشان می‎دهد.}, keywords_fa = {مدل AERMOD,ابعاد ساختمان,شکل ساختمان,برنامه ورودی پروفیل ساختمان(BPIP)}, url = {https://envs.sbu.ac.ir/article_97502.html}, eprint = {https://envs.sbu.ac.ir/article_97502_abf451fd5e18d52ef3dbd6e2f51fb25c.pdf} }